How Do You Mix Triclopyr 4 With Diesel?

Triclopyr is mixed at a rate of 3.2oz to 6.4oz per gallon.

How do you mix triclopyr 4?

Triclopyr 4 mix rates differ based on the application technique and target plant. Mix 3/8 (0.375 oz.) to 3/4 (0.75) fluid ounces of Alligare Triclopyr 4 per 1000 square feet in 1 to 2 gallons of water for spot treatments on ornamental turf. Please refer to the label for for exact application rates.

Can you mix garlon 4 with diesel?

The herbicide can be successfully dispersed over a vast region thanks to the massive, interconnected root systems. – Mix a 121/2 percent solution of Garlon 4, Tahoe 4, or Element 4 with diesel fuel, fuel oil, kerosene, or a commercial oil diluent (active ingredient triclopyr).

Can you use diesel as a surfactant?

It will require surfactants to be successful. If you’re spraying in a wide area, avoid using diesel as a surfactant. Diesel will kill the plant once it gets on the leaf, as well as your pasture’s healthy grasses.

What do you mix with Brushtox?

Aerial application: Use a 1:5 ratio (1 part oil to 5 parts water) in the spray mixture, up to 1 gallon of oil per acre, according to the mixing directions below.

Can triclopyr 4 be mixed with water?

Apply Alligare Triclopyr 4 foliarly as an oil-water emulsion or dilute with water. NOTE: For woody plant control, an oil-water emulsion outperforms a straight water dilution in a wider variety of conditions, and is suggested for aerial applications.

How long does it take for triclopyr 4 to work?

How long does Triclopyr take to take effect? Although you will notice the effects of Triclopyr soon after application, it usually takes two to three weeks for a plant to die.