How Do Propane Lights Work?

Incandescent lights are used in gas lanterns. They generate heat by burning a fuel such as propane, white gas, or kerosene, and the heat causes the mantles to emit light. The mantles are made of a ceramic mesh that encases the lantern’s flame. The following is an example of a typical mantle:

Mantles begin as silk cloth bags that have been treated with various oxides. The Welsbach mantle, which uses a blend of thorium oxide, cerium oxide, and magnesium oxide, has been the industry standard for decades.

Is it safe to use propane lighting indoors?

You may have lingering doubts about how to securely operate a propane gas lantern now that you’ve learned more about propane lanterns and some of their most significant characteristics. Continue reading to find out the answers to some of the most often asked questions concerning this type of camping gear.

Q. Do propane lanterns produce carbon monoxide?

Because propane releases carbon monoxide when burned, a propane lantern cannot be used indoors. A propane lantern, like outdoor patio heaters, should only be used outside.

Q. Can you burn a propane lantern indoors?

No. A propane light should never be used in an enclosed place, including a tent. When propane is burned, carbon monoxide is released into the air, which is toxic and even fatal. Always use a gas light in an open area with lots of airflow.

Q. How many cylinders should I bring for extras?

The number of cylinders required is determined by the duration of the camping excursion. Depending on the size of the lantern and the brightness of the setting, a single 16.4-ounce canister of propane will last for roughly 12 hours. On a high setting, a large two-mantle lantern will last four hours on a single canister, while a compact single-mantle lantern may last close to 12 hours.

Consider how many hours of light you’ll require at night. For a five-day trip requiring around four hours of lantern use per night, a large lantern will require five canisters while a tiny lantern will require two.

Q. Can the lantern flame blow out?

It is conceivable for a lantern to blow out, but this occurs infrequently. The mantles and housing of the lantern surround the flame, keeping it from being blown out by the wind. A blown-out lantern flame could be an indication of damage to the housing or a worn-out mantle.

Q. How long do propane lanterns last?

While propane lanterns can last a long time if properly maintained, the mantles that cast the light do wear out over time. Approximately every a year, the mantles should be replaced.

What are the workings of gas porch lights?

Natural gas or propane, both of which are safe and clean-burning fuels, are used in gas lanterns. The lanterns’ fuel is controlled by a switch that only generates enough fuel to light the flame at one time. If the flame runs out or you want to turn out the lantern, these switches can be switched off.

Is it true that gas lanterns are always on?

Gas lanterns are an appealing choice for some people who enjoy the flickering light of a gas flame that can reflect off surfaces such as glass windows and patio doors, ponds, pools, and lawns. A gas light creates a brighter, more intense light once installed, but these lanterns are prized for the soft, ambient light they emit. Because the flame flickers, it may not provide enough light in the area where you require it. It’s possible that you’ll require more lighting.

Gas Lighting Installation Costs

Installing a gas connection in the absence of a local gas line could cost $1,000 or more per line. Installing a gas line is not a do-it-yourself project; it should be done by a licensed expert in compliance with ANSIZZ233.1, the National Fuel Gas Code. 1/4″ copper tubing that has been internally tinned or treated to resist sulfur corrosion must be used by the installer.

Gas Lantern Operating Costs

In addition to installation costs, gas lanterns cost an average of $10 a month to operate, but depending on local gas prices, they can cost three times as much. Unless you extinguish the flame, it will remain lit. You’ll need to relight the flame with a match if you have a manual igniter. Electronic ignition gas units can be turned on using a switch.

Dying Flames

A rush of wind or an air draft can extinguish the flame. You can add a wind guard to protect the light, but it’s not a good idea to block the vent holes on the bottom of your lantern with coins or anything else, since this can cause the device to overheat. The wind chimney provides additional protection at the burner’s tip, preventing any wind from entering the lantern.

Well-ventilated Location

Because gas lanterns are noisy to run, emit a lot of heat, and can emit carbon monoxide, they should only be used in well-ventilated locations away from children and pets. They’re best used outside or in semi-enclosed spaces like outdoor kitchens, porches, verandas, and courtyards.

While you can choose a natural gas or propane post/column lantern from our Charleston, Georgetown Cities, or Yacht Basin Collections, you can also add additional electric exterior and interior lanterns to complete the look.

Copper is a good material for external lanterns, regardless of the fuel used. Our lights are comprised of 20 and 32-ounce copper, so they’ll endure a long time. Unlike lights made of nickel, aluminum, or composites, which only last three or four years before being destroyed by the elements, authentic copper and brass lanterns only get better with age. Copper, rather than rusting, develops a patina that gives it an ancient bronze appearance. The appearance of the product will vary depending on your location; for example, although copper in seaside settings may develop a greenish tone within a few years, this may not occur for decades elsewhere. In around three years, most copper deepens in color to “patina.”

Modern post lights and lanterns powered by any fuel improve your property’s safety and curb attractiveness. You could wish to put a post or column lantern in your yard to light your driveway or pathway leading up to your house, or even to light your front door for yourself or guests. The lighting looks wonderful installed on your exterior above flower beds or near water features in the yard, or handing on a fence, retaining wall, or other permanent structure. Post lanterns allow you to stay out late on your deck or patio. A gas or electric lantern can provide enough light to illuminate the surroundings. Is it better to run on gas or electricity?

What kind of lighting do the Amish use in their homes?

Home is where the heart is, whether you’re Amish or English. It is a mirror of our personalities. Homes are sacred sites in the Amish society. They are the places where Christian children are born, reared, and educated. A couple of times a year, each house hosts a church service, making their homes a place of worship.

Because home life is so important in sustaining Amish principles, the community closely guards what is and is not permitted within its gates. The utilization of technology is a topic that is always changing. The Amish group is well-known for eschewing contemporary amenities in favor of a simpler lifestyle. Amish officials, on the other hand, review new technology on a regular basis to see if they may benefit the community and church.

In Lancaster, York, and Chester counties, there are almost 200 Amish districts. Each district makes its own decisions on how it views and treats technology. As a result, certain homes may be able to accommodate more modern comforts than others. Continue reading to learn about some of the most prevalent technological features seen in Lancaster County Amish homes.

Washing Machines

Laundry becomes a day-long event when you live in a big family, as many Amish do. Thanks to electric washing machines, the English enjoy the benefit of being able to clean big heaps of clothes in a matter of hours. However, because the Amish do not have access to public utilities, they are unable to utilize contemporary washing machines.

Many Lancaster County Amish, on the other hand, have converted postwar period wringer washers that are powered by a diesel generator. Without the use of public electricity, clothes can be washed, rinsed, and agitated more readily. They hang the clothing on a long clothesline outdoors after they’ve been washed, and if necessary, they use a traditional stove-heated iron.


Although it’s difficult to envision a kitchen without a refrigerator nowadays, Lancaster Amish may have relied on iceboxes or other springhouses to keep food cold before to the 1970s. However, milk corporations revised their rules in 1969, requiring dairy farms to cool their milk in refrigerated bulk tanks. This encouraged Lancaster County’s Amish bishops to seek alternative refrigeration systems that did not rely on the public power supply. As a result, Amish dairy farms and home kitchens began to use gas or diesel-powered refrigerators.


Phones are still a contentious issue in certain churches. While there are numerous aspects to this issue, one source of concern is the link and possibly dependence that cell phones establish between the Amish and the rest of the world. Cell phone use may lead to a reliance on machines or technology to solve problems, as well as a reduction in interest in face-to-face relationships.

Phones, on the other hand, assist Amish-run enterprises in keeping up with English businesses. Cell phones are becoming increasingly important for staying in touch with clients, coworkers, and vendors. Others may require a phone in order to schedule a ride with an English driver or in the event of an emergency.

The acceptance of cellphones varies greatly from one church to the next. Some neighborhoods allow business phones, but they cannot be brought into the home. Some people have constructed little outhouse-like structures on the property’s perimeter that house a phone that may be used by many families. Others advise Amish families to borrow a neighbor’s phone when they need it. Any of the following answers are likely to be found in Lancaster County. Don’t be surprised if you find an Amish teen at market going through her social media account!


Many Amish use propane or naphtha-fueled lamps, which produce a bright, hot light. Traditional kerosene teardrop-style lights will be used by some of the more orthodox Amish villages.

With the rise of solar electricity in Amish settlements, battery-operated lights may also be found. Some Amish homes, for example, allow tiny bedside LED or bulb lamps for reading or getting out of bed at night. Solar panels can be used to charge the batteries in these lamps. Solar power might also be used to charge the batteries in the buggy headlights.

Is it possible to use propane to power lights?

Propane grills, fireplaces, stoves, water heaters, and even propane pool heaters and generators are all commonplace. But what about propane gas lights? For many, it’s a novel concept, but it’s changing the way people light their homes.

What is propane gas lighting, exactly? This sort of lighting is frequently wall-mounted, pole-mounted, or even hanging from a patio roof’s ceiling. Outdoor gas lights are a cost-effective and ecologically friendly method to add ambiance to your front porch, backyard patio, walks, pool areas, and even ponds.

Propane lights, which have the illuminating capacity of a 70-watt bulb, are a wonderful cost-effective and adequate replacement for electric bulbs for your porch light, outdoor garage lights, patio, and other areas where you need enough light to stroll comfortably, read, or enjoy outdoor activities after dark.

What are the advantages of using propane lights? Is it simple to install propane lights? Are there any propane lamps that can be used indoors? Let’s look into these issues and shed some light on them so you can decide if propane lighting would be a good fit for your home.

Q: My open flame keeps blowing out, what do I do?

  • Consider consulting with a local qualified gas specialist to make the following improvements to lessen the chance of blowouts in your open flame natural gas lamp:
  • Make sure the gas valve is between 50 and 75 percent open. Customers and installers frequently open the valve to its maximum setting to obtain the best flame, however this might generate an air pocket between the burner tip and the flame’s bottom, resulting in frequent blowouts. Most of the time, merely turning the valve back until the flame’s bottom reaches the burner’s tip solves the problem.
  • Run a piece of floss through the cooled slit in the brass stem to clean the burner tip on a regular basis. If any debris has accumulated or become trapped in this channel, the gas may not flow properly, resulting in more frequent blowouts.
  • Think about getting a Wind Guard. This physical item slides over the burner to provide an additional layer of wind protection. It does not detract from the appearance of the flame and may be readily installed by you or your technician.

Q: How do I clean a gas lantern tip?

  • To clear away any soot or debris from a gas mantle burner, carefully push a felt pipe cleaner between each mantle burner tip and the air shutter ring holes in the burner base at the bottom of the tube. Run a piece of dental floss through the cooled slot in the tip of the brass stem and massage it with a soft cloth to dislodge any soot or debris that may have settled or become caught in this passage if you’re using an open flame burner.

Q: How do you turn off or disconnect a gas lamp to troubleshoot?

  • A manual ignition valve is included in the collar of all of our gas lights. A flathead tool can be used to manually control the gas flow at this point (like a screwdriver). To turn off the gas, turn the valve to the 3 o’clock position and close it with a quarter-turn of your tool. Work with your gas specialist to switch off the main supply so that the lamp’s valve can be detached from the mainline inside the post, pillar, or wall.

Q: Do I need to change my mantle? If so, how frequently?

  • A mantle that has been damaged should be replaced as soon as feasible. We recommend that you replace your mantles at least once a year, in addition to repairing damaged mantles, to ensure that your lamp remains bright and fuel-efficient. Check visit our page on gas lamp mantle maintenance for additional information.

Q: How do I clean my open flame gas lamp?

  • Clean the burner tip of your open flame gas lamp at least twice a year. To do so, run a piece of dental floss or a wire brush through the cooled slot in the burner tip to remove any debris or soot that has fallen there, then massage it with a soft cloth.

Is it necessary to use electricity with gas lanterns?

Electronic ignition is ideal for natural gas and propane lanterns that are used indoors, in difficult-to-reach positions, or in windy environments. It allows you to turn on and off the gas lighting with the flick of a switch. The electrical ignition will automatically relight the flame if it goes out. It will automatically turn off if it is unable to relight the flame. Please keep in mind that electronic ignition is covered by a one-year guarantee. It, like all electronic components, has a shelf life and will need to be replaced at some point.

To use electronic ignition, the lantern must have both electricity and gas running to it.

A solar cell or a timer can be used as the switch. For additional information on how to install gas lights, see the installation section.