When you use a Gateway, you get a built-in Wi-Fi adaptor as well as an Ethernet connection and signal from the modem itself. A additional router can be added to this configuration, but it must be linked to the Gateway through Ethernet, and the Gateway’s integrated Wi-Fi adaptor must be disabled (Bridge Mode). This implies that the Wi-Fi signal would come from your office router, and you’d still have an Ethernet cable running from your modem to the router.
If you already have a modem/router setup and are considering adding a second router to the mix. This has been done before, but the link isn’t always reliable. You’ll need one router connected to the modem through Ethernet and a second router connected to the modem via Ethernet as well. Where the issue arises is that these gadgets will compete for the best signal, potentially destroying it totally.
Currently, each of our accounts can only handle one modem/gateway. So, if you were hoping to set up an entirely different setup at your office, you would be disappointed to learn that this is not possible.
Is it possible to have two Comcast internet accounts in one home?
I had a bad experience with Xfinity for a few days. I recently moved into a dwelling room with a coaxial outlet. In the house, my landlord has their own Xfinity modem. As a result, I contacted an agent. By the end of it, I had spoken with seven agents, each of whom told me four different things. Let’s take a look at them one by one.
Agent 1: It is not possible to have two Xfinity accounts in the same household. (no explanation provided)
Agent 2: You can have two Xfinity accounts in the same household; all you have to do is change your address (123-A Apple Street)
Agent 5: There’s no need to update your address; simply ask the technician to insert a new line.
Agent 6: There’s no need to alter your address because you can have as many Xfinity accounts as you like in your home.
Then I phoned Agent 7 because they had my wifi modem working but had disconnected my landlord’s, despite the fact that I had made it clear that the landlord had an account here and that I wanted both of them to work. My landlord phones me about the internet when he gets home, and I’m put in an unpleasant situation with my landlord, whom I’ve only known for two days. Our rooms are as far apart as they can be, so I had to stretch my modem as far as I could toward her room, then run a router as far as I could down the hallway. I phoned Agent 7 to schedule a tech appointment as soon as possible.
This tech arrives in the morning, solves the problem in less than 5 minutes, and informs me of the truth. SO, FOR ALL YOU FELLOW XFINITY USERS, HERE’S THE INSTRUCTIONAL PART:
There is no need to change the address. The two modems are not going to butt heads. If you change your address, an auditor will come out to check sure the 123-A Apple Street address still exists; if it doesn’t, your application will be rejected. It is necessary for the location to have its own utilities (kitchen bathroom, etc.)
The only way the modems would butt heads is if more than one account, such as Xfinity Flex, has video streaming. So, if you want Xfinity flex or something like, make sure no one else in the home does, or no one will be happy. You can have an unlimited number of internet-only accounts, but only one of them can stream video.
If you phone an agent and they tell you that you need to change your address. You inform them that they are WRONG.
Agent 5 may have been correct; the techs may have installed a separate line. Agent 6 was absolutely correct. Everyone else was wrong, including the first technologists.
To Xfinity: I enjoy Xfinity, and you guys keep me up to date on specials and special offers. This episode, on the other hand, was a nightmare. WAY TOO MANY MISINFORMED AGENTS AND TECHNICIANS spewing untruths. I had to sort through all of the data and figure out what was actually true. Right now, I know more about this topic than a number of your representatives.
How do I set up a Comcast router?
Connect the Ethernet wire to the WNR1000 router’s yellow connector on the rear. Connect the Ethernet cable to the Internet modem or router on the other end. Connect the power supply cord to the Router’s round socket on the rear, all the way to the right.
Is it possible to connect a router to a Comcast modem?
You can now utilize your own router instead of the router capabilities of the Wireless Gateway. At the upper right, click Logout. Connect your own router to one of the Xfinity Wireless Gateway’s Ethernet ports.
Is it possible to have two modems?
Yes, two or even more modems are permitted in a single residence. Many people rely solely on the information provided by their internet service provider, and many are unaware that using the internet does not need them to utilize only their equipment.
What’s the best way to install a second router to my home network?
Plug an Ethernet cable into any free port on the second router other than the uplink port to set up a new router as a network switch. Then connect it to any port other than the uplink port on the first router.
What is the cost of adding a router?
Wireless network elements can cost anywhere from $0.10 to $1 per linear foot for an ethernet 1 cable to $75 to $2,000 for other components. Wireless networks are made up of various components, each of which has its own set of charges. Some aspects, such as printers, will be needed, while others, such as printers, will be optional. For the purposes of this expense guide, we’ll only look at the essentials. A breakdown of the components and their average cost may be found in the table below. Then you’ll learn about each one and why it’s important to the network.
Ethernet Cable Price
When purchasing ethernet cable, most consumers choose for CAT-6 cable, which is somewhat more expensive ($0.25 to $0.35 per linear foot) but provides superior connectivity. Cable categories run up to CAT-8, however most hardware cannot keep up with the speed provided by this cable, so it is not generally utilized. When it is, the cost per linear foot can reach $1. CAT-5 cable, which costs $0.10 to $0.20 per linear foot and is suitable for those who want something less expensive or do not want top-of-the-line cabling, is another choice for those who want something less expensive or do not require top-of-the-line cabling. In a wireless network, Ethernet wires are still necessary. They connect your network to your home’s hardwired components.
Wi-Fi Router Price
The price of a wireless router 2 fluctuates based on the size and power of your network. A router, when purchased separately from the modem, will cost between $75 and $200. To build wireless connections in your new home network, you’ll need a wireless router. Although some modems come with a built-in router, this isn’t always the case.
Modem Wi-Fi Price
You should anticipate to spend between $100 and $250 depending on the system you operate and its power. The average cost of a modem that can handle a wireless computer network is around $150. A modem is required for a wireless network. Simply explained, a modem is a gadget that connects your home to the internet. On the market, there are various varieties of modems, each with a distinct price tag dependent on their performance and speed.
Average Computer Costs
Computers can cost anywhere from $650 to $2,000 or more, depending on a variety of factors. Laptops are often more expensive than desktop computers, especially when creating a wireless network for home portability. A Wi-Fi card is necessary for desktop computers, which is usually included in the price, but if it is not, you will need to purchase one. Depending on the type, Wi-Fi cards can cost anywhere from $25 to $100.
Is it possible to have two modems in the same house?
If you only have one Internet connection but two modems, you can link them using an Ethernet cable by putting one modem in bridge mode and physically connecting them.
Is it possible to use Xfinity pods?
The WiFi download speed in Gary’s workplace (one flight and another 25 feet up) recorded 57 Mbps using a Gen 1 xFi Pod hooked into power 25 feet from the Gateway at the bottom of a staircase. The workplace download speed increased to 282 Mbps after replacing an old Gen 2 xFi Pod with a new Gen 2 xFi Pod.
What is Xfinity bridge mode, and how does it work?
Every Internet-connected equipment has its own IP address, which can be used to identify it.
DHCP is a mechanism used by routers to assign IP addresses to devices in their network (Dynamic Host Configuration Protocol).
In addition, routers use a procedure known as NAT to provide separate private IP addresses to the devices in their network for simple identification (Network Address Translation).
By enabling bridge mode on your Xfinity router, you can use it as a DHCP server while removing NAT.
This means you can connect your Xfinity Router to an Xfinity-compatible Router to avoid xfinity not receiving full speed.