Magnets’ properties are used to generate electricity. Electrons are pulled and pushed by moving magnetic fields. Electrons in metals like copper and aluminum are strewn throughout. When you move a magnet around a coil of wire, or a coil of wire around a magnet, the electrons in the wire are pushed out and an electrical current is created. Kinetic energy (the energy of motion) is converted into electrical energy via electricity generators.
Is it feasible to get free energy from magnets?
Free energy isn’t found in magnets. They have their own internal energy. As the magnetism fades, it can be eliminated. There is an electric field vector surrounding the magnet due to the magnetic field, but eddy currents waste the electric potential.
Is it possible for magnets to produce electricity indefinitely?
A perpetual motion machine would not produce energy and would not be a permanent magnet motor. Instead, it would rely on magnetic forces to deliver electromagnetic energy delivered by the electron’s angular momentum.
Is it possible to turn a turbine with magnets?
What if you walked out of your house and into a futuristic car that resembled a donut?
The car rises roughly a foot from the ground after you press a button.
The vehicle is propelled forward by a small thruster as it follows an electromagnetic strip implanted in the road, which repels the automobile off the road.
Obviously, this is only a concept automobile, unveiled in China as part of Volkswagen’s People’s Car Project.
The Volkswagen Hover Car was unveiled at the Beijing Motor Show in 2012.
Electromagnetic and permanent magnetic motors are currently available and in use. The main point of contention is whether or not a perpetual energy magnetic motor exists (generator).
Electromagnetic energy is the energy emitted by electromagnetic radiation such as radio waves and visible light waves, which causes electric and magnetic fields to be generated.
A permanent magnet is a piece of magnetic material that, once magnetized or energized, remains magnetized or energized indefinitely “After being “charged” by an external magnetic field, the magnetized material keeps a functionally large magnetic moment. As a result, a permanent magnet can generate its own magnetic field, which can interact with other magnetizable materials or electric currents.
The Faraday flashlight, which we have all seen, is the most basic kind of magnetic energy.
The movement of shaking the flashlight back and forth generates enough energy to power the light bulb. The concept is straightforward. A magnet moves back and forth through a wire coil, producing an electrical current that is subsequently stored in a capacitor. When the flashlight is switched on, the capacitor transfers the stored energy to the bulb, similar to a battery-powered light.
This system is made up of five main components.
As it passes through the wire coil, the magnet generates the power. With each shake, the stronger the magnet, the more power is generated. On each pass of the magnet, the size of the wire coil (the number of windings) will also impact how much power is created. The electricity generated by shaking the flashlight is stored in the capacitor. The longer the light output, the greater the quality and size of the capacitor. Then there’s the LED light, which uses less energy and lasts longer. Last but not least, there’s the on/off switch.
The query is: “Is it possible to make a perpetual motion machine using a similar method?”
In a closed system, a perpetual motion machine violates the first rule of thermodynamics. Machines that generate labor and energy without requiring energy input violate the law of energy conservation. The laws of thermodynamics state that energy cannot be generated or destroyed arbitrarily. As a result, while a true perpetual motion engine may never be feasible, a near substitute could be developed. While energy is required to start a perpetual motion machine, a simple device like a hand crank might be the catalyst in a system that generates enough energy to sustain itself and give extra power.
The rotors hold permanent magnets distributed around the shaft in this sort of motor, which uses a permanent magnet construction.
These magnets must be synchronized with the stator magnets, and rare earths are required to generate sufficient power.
Permanent magnets would not be very permanent if there was not a sufficient supply of permanent magnet material.
The problem is that China produces the majority of the rare earth materials required to produce long-lasting magnets.
A permanent magnetic motor and an electromagnetic field induction motor are shown below.
A revolving magnetic field is created around the stator of an electromagnetic field induction motor, which rotates at synchronous (at the same time) speed. The stationary rotor conductors are severed by the revolving magnetic field that passes through the air gap. An electromagnetic field is induced in the rotor conductors due to the relative speed between the stationary rotor conductors and the spinning magnetic field. Current begins to flow through the rotor conductors as they are short-circuited. When these current-carrying rotor conductors are positioned in the stator’s magnetic field, they are subjected to a mechanical force that causes the rotor to rotate in the same direction as the revolving magnetic field.
An electric motor that uses permanent magnets is known as a permanent magnet motor. When a stator frame and rotor are present, all sorts of motors can function. The rotor of many electric motors is an electromagnet. Instead of an electromagnet, a permanent magnet is used in the rotor of a permanent magnet motor.
When compared to an induction motor, a permanent magnet motor can generate more torque. In addition, a permanent magnet motor, especially in a wind-power system, can be used for power generation rather than mechanical motion.
A permanent magnet motor’s magnets are usually comprised of neodymium, making them very powerful and long-lasting permanent magnets. To generate power, the wind spins the turbine, which activates the generator’s magnets and generates an electric current. As a result, significantly less energy is actually lost during the conversion of kinetic wind energy to electric current.
XEMC Darwind designs and manufactures multi-megawatt wind turbines using Direct Drive Permanent Magnet generator technology.
Magnets can also be used to generate efficient energy.
Faraday’s law of electromagnetic induction is used to generate magnetohydrodynamic power. When a conductive fluid, such as plasma, flows through a magnetic field, ions travel in a path that is perpendicular to both the magnetic field and the flow direction, resulting in an electromotive force. MHD is the most energy-efficient solar technology available today.
The term Magneto Hydro Dynamic (MHD) comes from the words magneto, which means magnetic field, and hydro, which means liquid, and dynamics, which means movement.
Without any mechanical moving parts, MHD creates electricity directly from a body of very hot flowing ionized gas. Superheated gases are created when solar energy is concentrated by mirrors and lenses. Solar MHD generated at a greater temperature is more efficient than other forms of solar thermal technologies that operate at a lower temperature.
Magnetohydrodynamics extracts power from a superheated moving ionized plasma using superconducting magnets.
The use of extremely large superconducting permanent magnets improves efficiency using MHD technology.
Permanent magnet generators generate power by attaching a hand crank or turbine to the generator, which causes it to move. Residential generators would use the hand crank, whereas hydroelectric plant generators would require the turbine. Inside the generator, magnets create a magnetic field that activates the electricity in the conductor every time it passes through. A continuous stream of electricity is created by the conductor’s consistent movement.
However, both electromagnetic and permanent magnet motors require an external source to start. The idea of a perpetual magnetic motor has been around for a long time, but it has yet to become a viable source of energy.
The concept behind magnetic perpetual motors is straightforward.
Magnets set magnetic perpetual motors in action, causing plates to rotate, and this motion drives the generator. It is capable of producing energy or electrical power without the use of any external fuel source. The electromagnetic field formed by the placement of the magnets is the source of power, and once the generator is up and running, you have access to all of the electricity you require for free. Power generators, which are commonly seen around the home, require a fuel source in order to generate energy.
A magnetic perpetual motor works by setting rotors in motion with carefully positioned magnets, and the rotors’ spinning powers the magnetic generator in the same way that a wind generator catches electricity from a rotating rotor.
These are not perpetual motors, despite their name.
Magnets, like everything else, ultimately wear out and lose their power.
A perpetual motor is a motor that runs for an indefinite amount of time.
The magnet fields inside the magnets generate the energy of a perpetual magnet motor.
These fields can be utilized to create movement by initiating force.
After then, the motion can be employed to generate energy.
A perpetual magnetic generator is also known as a magnetic powered generator.
The motors convert the force generated by the fields within the magnets into electric power.
If you put enough magnets together in the right way, they will repel each other.
By arranging these magnets in a circular pattern, you can hypothetically make a spinning wheel that is pushed by magnetic fields.
The motor provides energy by the spinning motion of the wheel.
Because the energy in magnets lasts for many years, the spinning wheel can rotate and keep spinning without ever stopping, generating electricity for many years.
This is how a magnetically powered generator becomes a perpetual generator.
Impossible?
Perhaps, but this notion has been the subject of multiple patents, and as the cost of energy continues to rise, more scientists will be looking for ways to build a workable perpetual magnetic generator.
Is it possible to power a light bulb with a magnet?
Magic happens when coils and magnets are brought together (in the appropriate orientation and moving with regard to each other). It’s the Edisonian magic of turning on a light bulb in this scenario. A coil inside the big U-shaped magnets rotates as the crank is turned. This results in a constantly fluctuating flux (a flux in flux? ), which produces a current within the coil thanks to Lenz’s Law. The light bulb can be powered by the induced current.
A magnet can produce how many volts?
At rotational speeds of 2000 to 3000 rpm, a permanent magnet generator may create voltages ranging from 69.5 to 223.7 V and frequencies ranging from 33.5 to 50.9 V in no-load situations.
Is it true that magnetic generators exist?
Permanent-magnet generators are simple in that they do not require a field current supply system. They are quite dependable. They do not, however, include any controls for the output voltage. A typical application is with a wind turbine, where the variable voltage and frequency generator output is fed into a power supply via an electronic frequency converter.
What is the lifespan of a magnet light?
Neodymium magnets can be used as a light source in a variety of ways. If you have an incandescent light source, all you have to do is expose it to a neodymium disc magnet’s magnetic field.
Along with these magnets, you can use 10 mm or 5 mm LED lights and lithium coin cell batteries. Simply crimp the LED’s leads over the coin cell battery, wrap a little piece of electrical tape around them, then place the neodymium magnet on top of the battery. A LED light source made in this manner should last 1-2 weeks.
Another option is to wrap electrical tape around a canister before winding copper wire around it. The wrapped wire’s loose ends can then be connected to the LED light bulb’s end parts. When you put a neodymium magnet inside the canister, it will cause an electric current to flow through the cable, causing the bulb to light up. The wonderful thing about this technology is that by adding more neodymium magnets to the canister, you can alter the brightness of the light bulb. On Youtube, there are numerous tutorials and demos; here are two examples:
How can I get free electricity for my home?
How to Make Electricity at Home
- Solar Panels for the Home Every beam of sunlight that lands on your roof provides you with free electricity.
What are some of the drawbacks of magnetic energy?
Disadvantages: One of the disadvantages of electromagnets is that they heat up quickly, resulting in a significant loss of electrical energy due to heat creation. A consistent magnetic field is required for a continuous power supply.
