Furthermore, all direct vent gas fireplaces are sealed to keep emissions out and are vented to the outside of your home utilizing the natural buoyancy of warm air (warm air rises), which means your gas fireplace or gas fireplace insert may be safely operated without the use of electricity.
Is it possible to operate my propane fireplace without using electricity?
Many gas fireplaces can be used without the use of electricity. During a power outage, both intermittent pilot ignition and standing pilot light systems can be used.
In most IPI valve systems, a backup battery system is used to ignite the flames. Standing pilot ignition valve systems, on the other hand, normally start on their own. However, you may need to manually start the pilot light every now and then.
When the electricity goes off, will a gas fireplace stay lit?
During a power outage, a gas fireplace with an intermittent pilot ignition (IPI) valve system will continue to operate. An IPI valve system is an energy-saving electronic system that ignites your pilot gas with an electrode. The pilot flame ignites your main burner gas after being sparked by electricity.
Is it necessary to use electricity with a gas fireplace insert?
No. Gas stoves and fireplaces create their own electricity rather than relying on electricity. This is done with the help of a thermopile built inside the pilot light. Millivolts of electricity are generated by this thermopile, which is utilized to open and close the gas valve. If your stove has a fan, you’ll need energy to run it, but for the most part, these appliances radiate heat efficiently on their own. Even if your home’s electricity goes out, the radiant heat from your appliance will keep you warm.
Cleaning the glass doors once a year is suggested to keep them clean.
The air to fuel mixture will decide how much noticeable build up accumulates on the window.
We sell a glass cleaner for gas appliances that works well.
3 – My current system runs on LP gas; would I be able to transition to natural gas if it becomes available?
Yes!
While gas conversion kits are available for purchase, we do not recommend that homeowners perform the work themselves. To ensure a safe and proper conversion from one gas to the other, it’s better to leave it to the pros.
4 – Why are there blue flames or condensation on the inside of my appliance’s glass?
During the first few minutes of using a gas stove, you may notice blue flames and water condensation. There is no danger in these circumstances. However, if blue flames linger after your equipment has been properly warmed up, you may need to make a little technical change. Within the first few minutes of using the stove, the condensation on the inside of the glass should vanish.
In a direct vent appliance, co-axial pipe is employed. A venting system with a pipe inside of another pipe is known as a pipe-in-pipe system. For the combustion process, the pipe on the outside brings air from outside into the stove or fireplace. The interior pipe is used to expel combustion by-products. These appliances can be installed in a variety of locations, including bathrooms, kitchens, and bedrooms, thanks to this system. This co-axial vent pipe can be inserted through the sidewall if the appliance will be mounted on an exterior wall. The co-axial vent pipe would be inserted vertically through the roof if an internal wall was planned. Gas appliances that are vented directly are often more efficient than those that are vented through a natural vent or a B-vent.
Although this technology has been around for a long time, it is not lawful in some locations to install these appliances. If combustion by-products are permitted to enter your home, they will degrade the quality of the air. Carbon dioxide, carbon monoxide, nitrous oxides, aldehydes, and water vapor are among the by-products. You may notice odors, condensation on the inside of windows and doors, and flare-ups of allergy and asthma issues if these combustion by-products are permitted to enter the home. To vent-free appliances, most manufacturers have included oxygen depletion sensors and catalytic combustors. Limiting the amount of time the ventless appliance is turned on will assist. While precautions can be made, it is always advisable to err on the side of caution, and we advocate installing a direct vented appliance and venting these gases to the outdoors wherever possible.
Controls for your gas fireplace or stove come in a variety of styles. The appliance will be turned on and off by a wall switch that functions similarly to a light switch. A wall thermostat allows you to choose your favorite setting for consistent heat. Remote controls can also be utilized to keep the room at a consistent temperature without having to get out of your chair.
Converting a wood-burning fireplace to a gas device is a separate process that can be done in a number of ways that are both safe and effective. There are a variety of options to utilize the current space of your fireplace while enhancing its use with an updated gas burning component, ranging from employing gas logs to installing a fireplace insert or gas stove. Typically, we’ll send a professional to your home to assess the best options for converting this space. We also invite you to visit our store to view how this equipment looks and how successful it is at heating!
People, furniture, and other items in a space are heated by radiant heat. Air that has been warmed by passing through a heat exchanger, such as in a forced air furnace, is known as convective heat. Convective heat can be thought of as air moving through a heated restricted space. Radiant heats objects in the same way as sunlight does.
Your new gas stove may “smell and smoke” for the first two to three hours of operation.
This is caused to solvents from the manufacturing process and the appliance’s paint drying. This stench should be gone after half an hour to an hour and a half. During this time, opening a window can be beneficial.
We encourage routine maintenance, just like any other equipment, to maintain safe and consistent functioning. Before the commencement of each burn season, annual inspections and cleanings are advised. To secure the maximum capabilities of the operating system and maximize the beauty of the flames, technical tweaks and enhancements may be required. We usually recommend having these changes made by a qualified hearth professional specialist.
Individual appliances may have different heat controls. The volume of gas consumed is increased or decreased to alter the temperature. This can be done manually using a gas valve knob or automatically using a multi-function remote control. The higher the flames and the more heat inside the space, the more gas is burned. In gas appliances, variable-speed fans turn on and off automatically. Keep the gas valve and fan turned on high to get the most heat out of your gas appliance. Similarly, turn the gas valve to “low” and the fan off to get the least amount of heat.
An insulated shell surrounds the firebox in zero clearance fireplaces, allowing them to be put against combustible building elements. These appliances are intended to be installed in a frame wall. The insulated casing that surrounds the firebox is not present in a gas fireplace insert. This gadget is designed to be slid or placed into your existing wood-burning fireplace. These inserts rely on the existing fireplace’s integrity to provide a safety buffer for any combustible materials. Another distinction is the ventilation requirements. A zero clearance fireplace can be vented horizontally or vertically through a side wall or the roof. The only way to vent a fireplace insert is to use the existing chimney as a conduit to get the venting components out of the house.
Locate the “on/off/pilot” knob on your appliance if the pilot light has to be re-lit. Twist the knob to match it with the “pilot position,” then press and keep it in place. Press the igniter button while keeping this knob pushed in (typically red or black). Before the pilot ignites, you may need to press the igniter button a few times. When it does, keep the knob in the pilot position for another 20 to 30 seconds to make sure the pilot stays lit. Turn the knob to the “on” position once you’ve finished this process and the pilot is lighted.
A selection of pilot modes is now available on some gas appliances.
You can run the appliance in either continuous pilot mode or intermittent pilot mode (IPI) using a switch.
When the appliance is not in use, the IPImode will turn off the pilot light in order to save gas.
Battery backup systems keep things running in the event of a power outage.
It’s still a good idea to keep the pilot light on. This will prevent insects from building webs and nests in and around the stove’s inner workings. If the appliance is in a moist environment, keeping the pilot light up will assist avoid inside rusting by keeping the interior warmer.
Some gas appliances, on the other hand, now have a selection of pilot modes.
You can run the appliance in either continuous pilot mode or intermittent pilot mode (IPI) using a switch.
In order to save gas, the IPI will turn off the pilot light when the appliance is not in use.
Battery backup systems keep things running in the event of a power outage.
When using a gas stove, the heat radiated by the burner can be quite powerful. While most youngsters are aware of the dangers of high temperatures, we provide a variety of screen shields to guarantee that children do not come too close to the scorching heat.
1. Get out of the house as soon as possible.
2. Make a phone call to the gas provider from outside your home.
3. Turn off or turn off all gas appliances in the house.
4. Do not use your phone while inside the house.
5. Comply with your gas company’s directions.
6. If you can’t reach the gas provider, call the fire department right away.
7. Never store or use gasoline or any other combustible material near a stove or fireplace.
Paying too much is risky, but paying too little is even riskier.
When you pay too much, you just lose a small amount of money.
When you pay too little, you risk losing everything because the object you bought is incapable of performing the function for which it was purchased.
Paying a little and obtaining a lot is against the common law of business balance. It’s impossible. When dealing with the lowest bidder, it’s a good idea to add something to compensate for the risk you’re taking. And if you do that, you’ll be able to afford something more. There isn’t much in the world that someone can’t make a little worse and sell for a little less, and individuals who only consider price are this man’s legal prey.
What is the operation of a propane fireplace?
Propane fireplaces are turned on and off by turning a switch after being connected to a propane gas line. You may control the intensity of the flames with a dial, and when you’re done, simply flip the switch to turn it off. They’re the modern alternative to awkward and obnoxious wood-burning fireplaces. Electric fireplaces are also a possibility, but they can’t create the same type of flame or heat quality as a wood-burning or gas fireplace, so there’s no comparison!
How can I keep my house warm if I don’t have access to electricity?
During power outages, kerosene heaters can be an excellent alternative source of heat. You can also utilize it if you want to save money on your bills.
When using a kerosene heater, it’s critical to observe all of the heating safety precautions. Choose a ventless option to reduce the production of hazardous fumes. To be safe, place your kerosene heater near the window and slightly open it. This will assist to prevent harmful gases from accumulating inside your home.
Is it true that a gas fireplace consumes a lot of gas?
Not in the least. One of the most cost-effective ways to heat your home is with natural gas. That’s why gas fireplaces, inserts, outdoor gas fireplaces, and even gas furnaces are such affordable heating solutions.
Most gas-powered fireplaces will burn up roughly $1 of natural gas each day, on average. This will provide approximately 68,807 BTU of heat.
A nice comparison to show how much it costs to run an electric fireplace vs. a gas fireplace is how much it costs to run an electric fireplace vs. a gas fireplace.
If you assume $0.1319/kWh for electricity and a 99 percent efficiency electric fireplace, and $1.09 per therm (100,000 BTU) for natural gas and a 75 percent efficiency gas fireplace, you get the following:
An electric fireplace produces 25,612 BTU of heat for every $1 spent.
That implies a gas fireplace costs approximately three times less to operate than an electric fireplace. Wall-mounted electric fireplaces (check them out here) typically only provide approximately 5,000 BTU/hr of heat, but gas fireplaces can produce anywhere from 8,000 BTU to 40,000 BTU.
An electric fireplace, on the other hand, might be a better alternative if you’re just looking for ambiance (rather than heat). Electric fireplaces may offer a cheaper cost-performance per heating BTU, but they only create 5,000 BTU, whereas gas fireplaces produce 20,000 BTU on average. In this situation, an electric fireplace is less expensive than a gas fireplace, but it is purely decorative and does not produce heat.
If you have any more concerns about the calculations, please leave them in the comments section below and we will do our best to assist you.
What is the source of electricity for a gas fireplace?
Our gas fireplace is a natural vent gas fireplace, which means that fresh air is vented from the room and waste air is discharged from the home via the chimney above the masonry fireplace in which it is installed.
This gas fireplace is only connected to the house gas mains and is not connected to the home electrics, either through a regular electrical outlet socket or plugged directly into the electrics.
Our gas fireplace similarly lacks a fan to pump warm air into the room via convection, instead relying only on the heat radiating out into the room to give warmth.
Our gas fireplace, on the other hand, is an older model from the early 2000s, and while it does not require an electrical connection, many modern gas fireplaces do.
Our gas fireplace has a standing pilot light that, once lighted with the thermocouple/thermopile, continues to burn indefinitely, allowing us to use the gas fireplace immediately.
Because keeping a pilot light on all of the time can be considered wasteful, many modern versions of gas fireplaces use an Intermittent Pilot Ignition (IPI) technology, which uses the home electrical supply to deliver the spark that lights the pilot light only when it is needed.
An IPI system provides an electrical feed to a gas fireplace, allowing it to deliver the spark needed to start the fireplace over and over again without the need for a standing pilot light even when the fireplace isn’t in use.
If you’re planning to buy a gas fireplace, make sure to ask the seller or manufacturer if the equipment requires power (if you can’t find the answer online).
If a gas fireplace requires electricity, it may come with a conventional power cord, although this will vary depending on the model of gas fireplace that requires electricity.
Electric gas fireplaces should be installed in accordance with national or local construction laws and requirements in your area of residence, as well as the manufacturer’s installation instructions. For example, a gas fireplace may require electrical grounding.
Do Ventless Gas Fireplaces Need Electricity?
A source of electricity is normally required for ventless gas fireplaces, which is commonly a conventional electrical outlet supply. In the event of a power outage, ventless gas fireplaces, like other types of gas fireplaces, will often contain a backup battery compartment.
Gas Logs
Do you have a wood-burning fireplace but want a more convenient and attractive alternative to burning wood? Gas logs are a stack of ceramic logs that fit inside your fireplace. Gas logs include a gas burner and are available in both vented and vent-free versions. Vent-free gas logs vent all of the heat and exhaust into the home, whereas vented gas logs vent up your existing chimney (they do not require a chimney or flue).
Gas logs are typically used for their appearance and aesthetics rather than for warmth. While they do produce heat, they don’t produce as much as a built-in gas fireplace or gas insert. Like a wood burning fireplace, the majority of the heat created by a gas log set flows straight up your chimney. This is one of the most important aspects to consider when deciding the sort of heating device to use. Warmth vs. aesthetics. If you want to add some extra warmth to your home, a gas insert or built-in gas fireplace is a good option.
Gas logs are also a less expensive heating device than a gas insert or built-in gas fireplace, so if money is an issue, this is a better option.
Gas Inserts
A gas insert may be right for you if you have a fireplace but don’t want to deal with the trouble of burning wood. Gas inserts are wood-burning fireplaces that have been converted to run on gas. Inserts are housed in a metal box that fits into the fireplace and is surrounded by a bigger metal box. The gas insert heats the air between the two boxes before releasing heat from its firebox. They’re ideal for homeowners who want to transition from a wood-burning fireplace to a more efficient and manageable heating system while preserving the heat.
Inserts, unlike gas logs, emit a lot of radiant heat and warm air. If you’re planning to use the fireplace as a source of heat, a gas insert is preferable to a gas log. Gas inserts, on the other hand, often create less heat than a built-in gas fireplace. Your gas insert is available in vented and vent-free variants, just like gas logs and fireplaces. Installing a gas log, like a gas log, usually necessitates the use of an existing fireplace or chimney.
Gas inserts are the most cost-effective alternative. They’re more expensive than gas logs, but less so than a fully integrated gas fireplace. Gas inserts, on the other hand, are significantly less expensive to operate than gas logs because to their efficiency.
Gas Fireplaces
Gas fireplaces and gas inserts are fairly similar. With the box-within-a-box structure, they’re built the same manner. The distinction between gas fireplaces and gas inserts, on the other hand, is that a built-in gas fireplace does not require an existing fireplace or chimney. This is your only choice if you don’t already have a wood-burning fireplace. But, really, how fantastic is that? If you’ve always wanted a fireplace but don’t have one, you now have an option.
Gas fireplaces are available in vented and vent-free types, just as gas inserts and gas logs. The air is vented from a vented gas fireplace through an outside opening in your wall. The exhaust from ventless gas fireplaces is directed into the room. There is no brickwork or use of a chimney. Built-in gas fireplaces are similar to gas inserts in that they are extremely dependable heat sources. A built-in gas fireplace will likely provide the highest BTUs of any of these three heating options. A gas fireplace is also the most expensive of the three heating options, as you might anticipate.
Gas Logs vs Gas Inserts vs Gas Fireplaces: Which One is Right for You?
So, now that you’ve learned everything there is to know about the similarities and differences between gas logs, gas inserts, and gas fireplaces, which one is right for you? How do you decide which of these goods is best for you? to choose To assist you in making your decision, let’s simplify it down to a few fundamental questions.
Are you looking for a product that has a realistic look for aesthetic purposes?
Gas logs will provide the most accurate real-fire look if you’re seeking for a heating device with a superb aesthetic look. The main purpose of gas logs is for aesthetics. It will generate some heat, but not nearly as much as built-in gas fireplaces or gas inserts. Gas fireplaces and inserts look wonderful, but they’re not as realistic as gas logs.
How much can you spend on a heating product?
If money is not an issue, a gas fireplace or gas insert could provide both aesthetics and warmth. If those are beyond of your price range, gas logs can provide heat while also providing a terrific, gorgeous, realistic-looking fire aesthetic.
Do you have an existing fireplace?
It’s straightforward. You can select between gas logs and gas inserts if you already have a fireplace. Your only alternative if you don’t already have a wood-burning fireplace is to install a built-in gas fireplace.
