To add pressure, start by drawing out the plunger near the lantern’s base and pushing it. Then, turn the dial to allow propane to enter the lantern, and light a match. To start the fire, place the match near the lantern’s base and adjust the gas and pressure as needed.
The lantern, along with a stove and other camping gear, is something you’ll need if you plan on being outside for an extended period of time. Continue reading to learn how to use your Coleman propane lantern more effectively.
What is the best way to light a Coleman propane lamp?
It’s relatively simple to light a propane lantern. Turn the gas on after attaching the propane canister to the lantern. If your lantern has an ignition switch, turn it on, or strike a match and use it to light the mantle. Once the mantle begins to glow, turn the gas down to the appropriate brightness level.
What is the best way to light my Coleman lantern?
11.Light a match or lighter beneath the mantle (s).
Wait for the mantle(s) to ignite after opening the valve a quarter turn.
12.Once the candle(s) begin to burn steadily (though dimly), fully open the valve and pump more air into the fount for maximum brilliance.
How often should a Coleman lantern be pumped?
Clean it up: Use a hose and a scrub brush to remove any dust, cobwebs, fly excrement, or other debris that has gathered. My vintage 228E twin mantle type has hung for 30 to 40 years in an ancient building. It was practically covered in a half-inch of dust. A new globe and mantles were all that was needed to get the lantern running again after a thorough external cleaning and drying, as well as a tank rinse with denatured alcohol. When it’s lit up, it’s extremely cool!
Lubricate the pump: Often, the pump is the only thing that isn’t working. If the lantern hasn’t been used in a long, it will need to be recharged.
What is the procedure for lighting a gas lantern?
Gas mantle lamps, which use a specific wick to provide light when supplied with gas and ignited, and open flame gas lamps, which work without a wick and burn gas directly, are the two major types of gas lamps and lights. Both types of gas lights require fuel and flame to function properly, and while your gas lamps shouldn’t require much maintenance, little faults may be resolved by looking at those sources first.
Fuel
Natural gas or liquid propane, depending on the style, are used to power gas lamps. Parts of the gas lamp can become clogged, causing it to burn in an inefficient manner. If this occurs, you can do the following steps:
- Clean the burner tip: Turn off the gas and remove the gas light mantle if you’re using a gas mantle burner. To clear out any soot or debris, gently insert a felt pipe cleaner between each mantle burner tip and the air shutter ring holes in the burner base at the bottom of the tube. After removing the old gas light mantle, be careful to replace it with a new one. Run a piece of dental floss through the cooled slot in the tip of the brass stem and massage it with a soft cloth to dislodge any soot or debris that may have settled or become caught in this passage if you’re using an open flame burner.
- Check the bug screen: Bug screens are designed to keep insects out of your gas lantern. If the screen becomes clogged, your gas light will run out of oxygen and the flame will go out. Check for obstructions in your bug screen and clean it with air. Replace the insect screen if it won’t come clean.
If you’ve tried all of these methods and your gas lamp is still not working, it’s time to seek professional help. Here are some things they should look into:
- Check for problems with the gas line: Gas lights will only work properly if the fuel line is at least 3/8 inch in diameter. If a shorter gas line is required, it must be no longer than eight feet in length. A licensed plumber can inspect and adjust erroneous gas line measurements.
- Check the gas light regulator: There should be a regulator in the gas line for your gas light.
- Have it tested by a professional using standardized testing equipment if one is already installed. When using natural gas, a gas pressure of 7 water column should be employed. When employing Liquid Propane, a gas pressure of 11 water column should be employed. A professional should install a regulator if your lamp does not have one. Without a regulator, too much gasoline can flow through the gas light, resulting in an overly rich air/fuel combination.
Fire
In addition to the price of wasted fuel, an outdoor extinguished flame might be dangerous.
- Manual and electrical ignition: A flathead tool and a long lighter are used to light your gas lamp with manual ignition. Your gas lamp is lighted with an electronic ignition system, which creates a spark over the gas and ignites the flame using a light switch or timer. If the manual burner or valve is broken, you won’t be able to light the gas lamp with a lighter and will need to have them replaced. It’s preferable to have a trained electrician inspect and replace your gas lamp’s electrical ignition module if it has stopped operating.
Can a Coleman lantern be used without a mantle?
Allow the lantern to cool completely before placing it in the box. The glass becomes quite heated. You can fire both mantles as many times as you wish as long as they are in good condition. It will light if only one mantle is complete, but the light will be poor and it will smoke.
How do you ignite a propane lantern with two mantles?
Up to 810 Lumens are produced by the twin mantle design. With a robust base and tip-resistant feet, the lantern stays firmly in place. To effortlessly ignite the silk mantles, use a lighter or match, then set the control knob to your chosen light level.
Is it true that Coleman lanterns emit carbon monoxide?
QUESTION: I recently unpacked a new Coleman light and discovered that it cannot be used indoors after reading the instructions. Years ago, on fishing expeditions, I used the same type of light, hanging it in a cabin so we could play card games. Then, there was never a problem. So, what’s the issue now?
ANSWER: Indoor combustion of any fossil fuel is potentially hazardous. Coleman lanterns consume fossil fuel and, if used indoors, can build up dangerous levels of carbon monoxide. As a result, Coleman strongly advises customers to only use their lanterns outside.
