Is It Bad To Use A Propane Torch For Dabs?

Propane torches are ideal for larger-scale home renovation jobs. These are commonly used in the construction, manufacturing, and metalworking industries for welding and soldering metals. Although propane torches can be employed in large-scale industrial undertakings, they can also be used in the kitchen, similar to butane but with ventilation limits.

The temperature of a propane torch can reach above 3,600 degrees depending on the type. Propane torches are the same price as butane torches, ranging from $15 to $20 at Amazon and Home Depot.

Propane torch pros

Propane torches work more faster than butane torches because of the increased heat and faster burn. They can do basic plumbing tasks and are less expensive than higher-heat equivalents. Propane, unlike butane, has a boiling point of -43 degrees, allowing it to work in below-freezing temperatures.

While butane is commonly used as a cooking light indoors, propane is the preferable option for outside grilling. Butane will not be operative in certain conditions throughout the winter, thus propane is the natural alternative.

Propane torch cons

Propane burns hotter than butane, but at the cost of increased carbon monoxide emissions. If you’re going to use a propane torch inside, be sure you have enough ventilation. Propane torches have a larger tank than butane torches, making them less portable.

Best propane torches

This high-heat torch includes a continuous flame lock and instant on/off ignition. It contains a flame control valve and an angled stainless steel burn tube. Toolboxes, tackle boxes, and camping packs may all accommodate the torch.

For dabs, what sort of torch should you use?

Everyone will most likely desire something different. Picking the ideal torch, like many other things, is a matter of personal preference.

There are a few things to check for while selecting a dabbing torch, so keep these in mind.

Safety Features & Precautions

While dabbing is a safe way to use marijuana, many torches include butane, which poses a risk. To avoid gas leaks, make sure the plug and nozzle are tightly connected to reduce the chance of an accident. For obvious reasons, flammable materials must be kept away from the torch.

There are now automatic locking dab torches on the market. Narrow-based lights, on the other hand, can be knocked out, which can result in a fire. Before dabbing, we also recommend cleansing your torch. It’s possible that a new torch will incorporate oxygen. When utilising the torch for the first time, don’t fill up the chamber. It could extinguish the flame if it isn’t purged, or it won’t let the butane to ignite properly if it isn’t.

Temperature Control

As previously stated, altering the temperature allows you to choose the type of aroma and taste you want. A dab at a low temperature extracts more flavour from the concentrate. You’ll also get smoother and longer hits as a bonus. Unfortunately, the vapour produced here isn’t extremely thick or dense. It has a softer effect and may leave a small amount of concentrate behind.

The clouds of vapour produced by a high-temperature dab are significantly more pleasurable, because it uses almost all of the concentrate. It does, however, result in a reduction in flavour intensity. The technique is manual unless you have a self-heating nail. As a result, concentrate on the things you can control, such as how long you heat and cool the nail. You should also utilise a timer to assist you in reaching the ideal temperature for your requirements.

Suitability for Dabbing Type

In general, a torch that quickly heats the nail is the best option. Proponents of the ‘low and slow’ technique, on the other hand, say that a powerful torch isn’t required. In many circumstances, all that is required is for the nail to attain a temperature of between 350 and 450 degrees. As a result, the draw is smoother and more delicious. It is also arguably less taxing on the lungs than other ways.

If you’re all about the vapour, you’ll probably want a torch that can swiftly heat the nail to 700 degrees or higher. Naturally, part of your concentrate will be left behind during this process.

The cold-start approach is another another type of dabbing. Pre-heating the nail and adding the concentrates will usually result in a low-temperature dab. The material is placed on a cold nail in the cold-start or reverse process. You’re better off investing in a banger if you go this path.

To bring the nail to the proper temperature as quickly as possible, you may need a stronger flame. It is feasible to heat the nail to the point when the concentrate bubbles and vaporises in less than 10 seconds. This method, however, wastes a lot of concentrate, and you’re unlikely to get more than a single dab in a session with this way. On the plus side, if you’re short on time, it’s great.

Gas Type

Torches are often powered by butane or propane. Butane, according to most experts, is the greatest option because it has no effect on the flavour or aroma of marijuana. Furthermore, propane torches are more likely to burn too hot, making them a riskier alternative. When you burn a nail with propane, titanium dioxide is formed. At high temperatures, inhaling it can irritate the nose and throat, and it’s also a probable carcinogen.

Size

It was typical to see people on YouTube utilising massive propane tanks in the early days of dabbing. The massive flames emitted by such torches were mind-blowing. Common reason eventually won out, and folks realised they didn’t need a flamethrower. The massive torch was put on the scrapheap once dabbers started enjoying the delights of ‘low and slow.’

In reality, most people will be OK with a torch that is 3-4 inches long. It’s great to have a torch that you can take with you when you’re out and about. If you have a large rig, you may require a 6-inch version. One advantage of a larger torch is that a butane option’s chamber has more capacity, requiring less refilling.

Flame Jets

You won’t need more than one flame jet for the most part. However, the type of nail on your rig has a big impact. For a titanium nail, a modest torch with one flame jet is usually sufficient. The popular quartz banger, on the other hand, comes in a variety of thicknesses. A single jet can be used with the 2mm option because it is thin enough. You’ll swiftly heat this nail, and it’ll be easier to do so evenly. If you like a low and leisurely approach, go with a 2mm.

The most common quartz banger thickness is 4mm. At this point, you’ll need a flame jet with a diameter of at least 0.25 inches and a length of at least two inches. To get the most out of a 4mm banger, you’ll probably need a larger dab torch with a stand. You’ll need more than one flame jet once you’ve reached 6mm.

Is it possible to dab with a Bernzomatic torch?

The Bernzomatic TS8000 High Intensity Torch is arguably the pinnacle of dab torches. It’s a serious machine that runs on propane rather than butane. It can be connected to most propane tanks or purchased separately as High Intensity fuel canisters. It’s a tank of a torch with long-lasting canisters. The flame may be locked, the ignite button is simple to operate, and the torch is simple to replenish. Bernzomatic torches are dependable and will last for many years. They come in a variety of types, but most dabbers will like the High Intensity.

Can a propane torch cause carbon monoxide poisoning?

Carbon monoxide is a byproduct of incomplete gas combustion, which is frequently caused by improperly adjusted appliances. Propane appliances that are properly maintained will produce a “perfect burn” during combustion, posing no risk of carbon monoxide poisoning.

Is it possible for a propane torch to explode?

Propane tanks do not burst into flames. They don’t implode, rupture, or disintegrate on their own. In truth, raising a propane tank to the point of “explosion” is a much more complex and time-consuming procedure than most people believe. Many people believe that a propane tank “explosion” can happen at any moment. This is not the case, and people should be aware that under normal circumstances, a propane tank will not explode or rupture. Explosions, accidents, and propanetank ruptures or breaches are all prevented by safety measures and processes. Human mistake, like any other hazardous material or activity, is a major role in preventing or contributing to any form of mishap, no matter how serious.

Will dabs be possible with a butane lighter?

You can use a torch lighter to dab, but there are several distinctions between butane and propane. Butane is often seen to be the superior choice for dabbing with a torch lighter.

How do you use a torch to heat a dab rig?

With a torch, heat your banger until it glows red-hot. Begin your countdown as soon as the flame has been removed from your setup. For most bangers, 40 seconds is the ideal length. From dab to dab, keep an eye on the consistency of your concentrates.

Vaporize it

Another easy way to dab without a flame is to use a vaporiser. Vape pens, for example, are fantastic for dabbing on the fly and extending the life of your oil. Vaporizers have an atomiser chamber with a quartz, ceramic, or titanium coil that is heated by the battery and vaporises the oil. The battery lasts a long time, sometimes even days, depending on how much you use it. Vapes can cost anywhere from $30 to $200 or more, but the lower the price, the less you receive.

Top a bowl

Believe it or not, hash oil has been around for a long time. On the other hand, oil rigs and butane torches are relatively new additions to the process. So, how did they do it all those years ago? Simple: They rubbed oil into a bowl of cannabis that was overflowing. To do this, use about two average dabs per bowl, but if you’re sharing, spread it around so everyone gets a taste of the oil. Ideally, fill the bowl halfway, dab, and continue until it’s completely full. This allows you to smoke the oil without burning off some of the THC by exposing it to open flame.

Line a joint

You can approach this style of dabbing without a torch or equipment in a few of ways. You may either dab the oil onto the cannabis as you spread it around the paper or crumble it and sprinkle it all over. Better better, use your oil to construct a long snake and wrap it around the joint’s outside. If you put wax on one end of the joint, you’ll burn off the THC, and if you put wax on the other end, you’ll get oil in your mouth.

Why does my dab have a burnt flavour?

There are a variety of reasons why a vape pen tastes burnt, including taking too many consecutive hits without pausing, causing your coils to be ruined. Not priming the coils before using them. There’s a lot of high-powered vaping going on.