How Do You Measure The Length Of A Utility Trailer?

The dimensions of the trailer are taken from the outside of the box. A 7′ X 16′ trailer, for example, signifies that the trailer is 7 feet broad from one side of the box to the other side of the box. The trailer is 16 feet long from back to front, but only the rectangle portion of the box is visible.

The length is usually not included in this measurement if the trailer has a “V” nose. Many “V” nose trailers add an extra 2 feet to the trailer’s length. In conclusion, a 24 foot “V” nose trailer may have a total length of 26 feet when measured from the trailer’s farthest point in the front to its farthest position in the back.

Outside height: Keep in mind that the eight is calculated from the box’s bottom to its top. ROOF VENTS AND OTHER INSTALLED ITEMS ARE NOT INCLUDED.


Is the tongue included in the length of a utility trailer?

A tag-along trailer’s length does not include the tongue. A gooseneck or fifth-neck wheel’s (which is almost normally 8′) is included. Horse and/or livestock trailers are not included. When it comes to trailer length, be sure to ask precise questions because lengths can often be inflated.

What is the length and width of a trailer?

Semi-trailers have the following standard dimensions: 48-53 feet in length (576 – 636 inches) 8.5 feet in width (102 inches) 13.5 feet in height (162 inches)

Is the hitch included in the trailer’s length?

The length of the trailer unit only is included in the measurement information provided by travel trailer manufacturers; the tongue, hitch, and tow vehicle are not included. As a result, multiple measurements are required to determine the overall length of the entire setup: inside, exterior, and overall length.

  • The internal length of a trailer determines how much living space it has, and it is one of the most straightforward measures to obtain. It’s merely the distance between the trailer’s front and back walls.
  • The overall length refers to the total length of the trailer. You should know how long the trailer is without the hitch and how long it is with the hitch and tow vehicle attached. When looking for a parking spot or a campsite, the second measurement will come in handy.

The marketed length should equal the floor plan length, according to the RV Industry Association (RVIA). The tongue and rear bumper are not included in this measurement. As a result, the length measurement you see when you buy your travel trailer may not truly reflect how much space you have, especially when it comes to parking.

State-run campgrounds, on the other hand, measure the length of the unit because the tow vehicle is normally parked separately.

Finally, take as many measurements as possible to get a clear picture of how much space you’ll need for both the trailer unit and the rest of your setup. Because knowledge is power, the more information you have, the better!

What is the maximum capacity of a 5×8 utility trailer?

Our 5×8 utility trailers have a smooth ride and low loading decks, making loading and towing a breeze. The payload capacity of the 5×8 trailer rental is 1,890 lbs, which should be plenty for any delivery or home improvement project! All of our utility trailers offer lots of tie-downs for you to use ropes, tarps, or straps to secure your load.

Landscape or construction materials are appropriate for hauling in utility trailers. The 5×8 utility trailer, with plenty of floor space and an open top, is ideal for picking up tall plants from the nursery or 4×8 sheets of plywood. Businesses that transport items for trade exhibits or deliver goods to consumers frequently hire the 5×8 utility trailer, while individuals frequently rent to move furniture, pick up purchases, and haul camping gear and ATVs.

Today, reserve and schedule your utility trailer rental online to save time. Because we prioritize safety, we urge all trailer customers to load the trailer heavier in the front, secure your load with tie-downs, drive slower than usual, and always use your seatbelt.

What can a 5×8 trailer hold?

  • Cargo trailer, 4 ft. x 8 ft.: Holds up to 1,600 pounds and is ideal for college students packing their dorm rooms or anyone relocating a few pieces of furniture.
  • a loveseat couch, chairs, a kitchen table, a twin bed, etc. 5 ft. x 8 ft. cargo trailer: Fits furnishings for a basic studio apartment: a loveseat couch, chairs, a kitchen table, a twin bed, etc.
  • A queen-sized bed, a couch, chairs, boxes, electronics, and square dining room tables may all fit on a 5 ft. x 10 ft. cargo trailer.
  • Cargo trailer, 6 ft. x 12 ft.: Holds up to 2,500 pounds and many rooms of furniture, including L-shaped couches, pianos, and other bulky goods. If you’re a minimalist, you may get away with a two-bedroom house.

A complete moving truck is required for homes with a lot of furnishings and two to four bedrooms. On our list of the Best Moving Truck Rental Companies, you may choose a truck that matches your demands.

How big of a utility trailer should I get?

The first question to ask yourself while deciding on a utility trailer is what you’ll use it for.

Of course, it’ll wind up serving more purposes than you anticipated, especially if your friends see it and ask you to assist them with their relocation.

However, the most important factor to consider is the type of burden you’ll be carrying on a regular basis. A 5 by 8 should suffice for simple needs such as carrying a lawnmower or conducting household trash runs.

A 7 x 16 or 7 x 18 equipment trailer may be required for larger jobs such as carrying tractors or bobcats. The basic practice is to order a size larger than you think you’ll need.

How can you figure out how wide a utility trailer is?

Expert Response: A trailer’s width is actually determined by its widest point. If the trailer’s wheels are outside of the frame, the width is measured from the outside of one fender to the outside of the other fender on the other side of the trailer.