Meters keep track of how much water is consumed. You may calculate how many units of water you’ve used since your last meter reading by subtracting the current measurement from the previous reading. To calculate your water consumption in dollars, multiply the units by your current water rate.
In Cebu, how much does a cubic meter of water cost?
MCWD Chairman Rene Mercado, speaking during a news conference, asked for the public’s patience, explaining that the adjustment will pay for upgrades to the water district’s services as well as additional water connections.
Because the district expects an extra bulk water supply of 18,000 cubic meters per day from Cebu Manila Water Inc. in December 2015 and 5,000 cubic meters per day from Danao City Bulk Water Supply the following year, MCWD will focus on pipes.
Cebu Manila Water is a joint venture between the province of Cebu and Ayala Corporation.
MCWD’s last water rate hike, according to General Manager Ernie Delco, was in 2006.
The current rates are P13.60 per cubic meter for the first 10 cubic meters, P15 for the next 11-20 cubic meters, P17.65 for the next 21-30 cubic meters, and P48.40 for the next 31 cubic meters.
The revised prices will be P15.20 for the first 10 cubic meters, P16.80 for 11-20 cubic meters, P19.77 for 21-30 cubic meters, and P48.40 for use over 31 cubic meters, effective January 1, 2015.
According to Mercado, the increase for the first 10 cubic meters is merely P1.60 per barrel of water, or around 32 centavos.
Delco pointed out that while inflation has risen every year, minimum salaries have climbed by 40% since 2006, and power bills have increased by 45 percent since 2006, the MCWD rate has remained unchanged for the past eight years.
According to him, MCWD requested a 12% rise every year from 2005 through 2009 in 2005. If it had been enacted, the minimum water cost for the first 10 cubic meters would have been P191 instead of P136 today. Instead of the current P48.40 per cubic meter, the maximum rate may be P68.
MCWD officials claimed that despite not raising rates since 2006, they were able to increase production capacity from 166,120 cubic meters per day to 207,923 cubic meters per day.
According to Mercado and Delco, the increase will result in an increase in production capacity of 29,500 cubic meters in 2015 and 17,000 cubic meters in 2016. In 2015, pipelines for additional users will be expanded by 41.98 kilometers and 4.62 kilometers, respectively.
MCWD plans to add 15,211 new water service connections in 2015 and 15,589 in 2016.
“We also intend to cut NRW to 23.11 percent in 2015 and 21.49 percent in 2016, according to Delco.
Water for fire trucks is included in NRW, as well as the supply that is lost due to illegal connections and leakage.
“As part of our Corporate Social Responsibility, we are now considering the water used by fire vehicles (CSR). We’ll use the CSR budget to cover the fire department’s water usage, according to Mercado.
“MCWD will gain P45 million in more revenue by reducing NRW by just one percentage point. As a result, lowering NRW is critical, according to Delco.
Delco went on to say that they are accepting bulk water supplies from surface water since the MCWD Board has decided to discontinue relying on groundwater sources due to saltwater intrusion into the aquifer.
In Cebu, out of all the groundwater drawn, “Only 35% is taken by MCWD, with the remaining 65% being pumped by private suppliers, subdivision owners, and individuals. How can we persuade people to stop if we don’t stop first? Delco remarked.
According to Teresa Chan, president of the Cebu Chamber of Commerce and Industry (CCCI), any additional advantage provided by MCWD at the same price would be beneficial.
If an increase is essential, she says, it should be kept to a minimum and the additional benefits should be visible or felt.
Water is a basic need that the government should offer at the lowest possible cost, according to Chan.
Past president of the Mandaue Chamber of Commerce and Industry (MCCI), businessman Philip Tan, remarked that individuals must learn to conserve water in order to save money. However, he believes that privatizing inefficient government agencies is the preferable option in the long run.
Associated Labor Unions-Trade Union Congress of the Philippines spokesman Art Barrit said that raising water fees is a sad development, considering that water is an infrastructure program, and that the government should address water supply concerns adequately if it wants investors to stay in Cebu.
He claimed that the hike would put more strain on staff. (Sun.Star Cebu/EOB)
What is the formula for calculating a bill reading meter?
You can figure how much your electricity bill should be by conducting your own reading. One of three types of meters will be installed in your home:
Analogue (dial) meter
Let’s look at how to get the reading from each type of meter before we show you how to calculate your energy usage.
Your electricity is measured in kilowatt-hours by your meter (kWh). One unit equals one kilowatt-hour. Your statement will usually include a cost per unit, which will come in helpful later when we break down the equation for you.
You’ll normally observe five separate dials while dealing with a dial meter. Use the number that was recently passed if the dial is between two numbers. Only read a number if the dial to its right has passed zero.
You’re undoubtedly curious as to what these statistics imply. They are, after all, symbols for the quantity of energy you consume. The more energy you use, the faster your dial will turn, raising the number on the dial. Consider it like the number of miles on your car’s dashboard. The more miles you travel, the more miles will appear on your dashboard. When it comes to reading your meter, the same principle applies.
Digital and smart meters are far more user-friendly and straightforward. You simply need to take note of the first five figures displayed on a digital meter. If, after the first five numbers on your meter, you observe a group of numbers that starts with 0.1, ignore them.
You can compute how much electricity you’ve used since your last electricity payment after you get your meter reading. To do so, locate your most recent electric statement and look at the reported reading. You’ll then deduct your current reading from the previous month’s reading. The total quantity of kWh you’ve used since your last meter reading is the outcome.
The reading on your meter will never be reset to zero. The number on your meter shows the number of kilowatt hours consumed since the meter was installed. As a result, this number will continue to rise, making it critical to compare your meter readings every month.
Energy companies may bill you based on an estimate created from your home’s historical use, which means you may be charged a higher bill simply because individuals who previously lived in your home utilized a lot of energy.
You’ll also need to know how much your utility company costs per kilowatt hour and if your account includes any fixed fees to compute your bill. You’ll be ready to go after you have that information plus the total quantity of kWh utilized since your last meter reading.
You’ll then multiply this figure by the kWh rate your electricity company charges, as well as any set costs.
- meter reading at the moment Last month’s bill meter reading = Total kWh used since the last reading
- Total energy charge = Total kWh utilized since the last reading x Charge per kWh
- Final bill = total energy charge + fixed monthly fees
The equation above will assist you in keeping track of your energy usage. It’s a simple activity that, if completed, can help you save money on a monthly basis. If you care about the environment, you shouldn’t have to pay a hefty energy bill. Calculating it yourself will put an end to your exorbitant bill.
How much does a typical water bill cost?
In July, Auckland water prices will increase by 7%, bringing the average annual household water bill to $1224.
Watercare, the council-controlled organization in charge of the city’s water and wastewater services, authorized the additional rates today.
Auckland Council is also proposing a 6.1 percent rate hike beginning in July, with a climate-action targeted rate of 2.4 percent to fund new and frequent bus routes, native tree planting, and other emissions-reduction measures.
The past 12 months have been difficult for Watercare, according to chief executive Jon Lamonte, with Covid-19 driving up operational expenses and inflation driving up construction prices.
What is the formula for calculating a water bill per cubic meter?
Do we have to wait for the MBWD’s meter reader to figure out how much water we use in a month? There’s no need! In fact, using basic mathematics, we can calculate our monthly water consumption. The key to understanding your household water usage is to look at your water meter. The amount you are charged each month on your water bill is determined on the reading from your water meter.
1) For starters, you might be curious in how much water you use in a day. You may calculate how much water you and your family used by comparing the two totals from your meter at the start and end of the day.
2) Checking for leaks is the second reason. Look at the leak detection indicator* on your meter after you’ve turned off all the taps and water-using appliances in your house. If it’s turning, you’ve probably got a leak someplace.
Read your meter at the same time every day for the best results. Water usage is measured in cubic meters by meters.
To figure out how much water you’ve used since your last measurement, multiply the current meter reading by the prior meter reading (from your water bill) to get the number of cubic meters utilized. If your prior reading was 001,200 and your new reading is 001,250, you have used 50 cubic meters of water since your previous reading. Because one drum equals 200 liters, 1 cubic meter is equal to 5 drums.
It is a novel Metro Bangued Water District connection installation technique in which water meters of clustered concessionaires or concessionaires whose dwellings are close together are put or clustered at just one location and share one tapping point at the District’s distribution line. Furthermore, all water meters have been set at the road’s shoulders or outside private houses. All meters that were previously set inside private lots were transferred outside the concessionaires’ grounds.
The following are the goals of water meter clustering:
- Non-revenue water will be reduced as unlawful connections and water meter theft are avoided, and the likelihood of future leaks will be reduced as tapping sites in distribution lines are vulnerable to leakage owing to wear and tear.
- During the reading period, there is easy access to the water meters.
- To avoid unpleasant situations and make disconnection activities easier to conduct.
- To avoid mishaps such as dog bites when reading meters, etc.
How do I pay my MCWD water bill online?
Customers of the MCWD can also pay their bills online using a VISA credit card at www.mcwd.gov.ph. MCWD bill payments are also accepted at EC Pay and Bayad Center locations for the convenience of MCWD customers.
Who is the owner of MCWD?
The Metro Cebu Water District (MCWD) was founded in 1975 as a government-owned and controlled corporation to supply water to Metropolitan Cebu’s four cities and villages.
They currently provide safe water to 900.000 people, or 48% of the population in the service region. MCWD has the financial resources to expand its distribution systems significantly, particularly into impoverished regions where risks are higher and returns are lower. As a result, the majority of the urban poor are compelled to buy expensive water from private merchants or dig their own wells, both of which pose health, hygienic, and financial problems.
The Sustainable Water Fund’s partnership with MCWD allows for a pro-poor approach to the utility’s network expansions by assisting in the funding of additional pipes and meter access points in low-income communities. All socioeconomic communities will be able to access safe, sustainable, and inexpensive water as a result of this project.
In the Philippines, how much does a cubic meter of water cost?
For the second quarter of 2021, the MWSS RO has confirmed a tariff adjustment on customers’ water bills.
Based on its examination of the Concessionaires’ FCDA proposals, the MWSS Board of Trustees (BOT) has approved the MWSS Regulatory Office’s (RO) recommendation to adopt the 2021 2nd Quarter Foreign Currency Differential Adjustment (FCDA) effective 01 April 2021.
Manila Water Company, Inc., which provides water and wastewater services in the East Zone Concession Area, will impose an FCDA of 0.84 percent of its 2021 Average Basic Charge of Php28.52 per cubic meter, or Php0.24 per cubic meter. This is a Php0.05 per cubic meter increase above the previous FCDA of Php0.19 per cubic meter.
Maynilad Water Services, Inc., which serves the West Zone Concession Area, will charge a negative 0.41 percent FCDA on its 2021 ABC of Php36.24 per cubic meter, or negative Php0.15 per cubic meter. From the prior FCDA of negative Php0.14 per cubic meter, this represents a downward adjustment of Php0.01 per cubic meter.
The FCDA is a quarterly-reviewed tariff mechanism that allows concessionaires to recover losses or give back gains due to fluctuations in foreign exchange rates while making payments for foreign currency-denominated loans used to expand and upgrade water and sewerage services. It’s a correction mechanism devised by the MWSS RO to prevent under- or over-recovery as a result of currency movements.
