A scrub brush or long-handled push broom, a hose, and liquid dish soap are required to remove oil stains from a driveway. Using a squirt bottle, squirt the dish soap straight over the diesel stain, then add a few drops of water to help the soap spread. Scrub the oil stain with soap and water. This forms an emulsion, which lifts the oil from the asphalt. Using water from a hose, rinse the soap away. Repeat the cleaning process if grease streaks appear in the water. Warm water will aid in the removal of stubborn stains.
How do you clean diesel off of concrete?
- Although I am unfamiliar with #2 heating oil/diesel, I feel that removing this product/odor from a basement will be a long-term process.
- Cleaning gasoline from concrete is difficult, but it can typically be done with cat litter (as indicated) and then laundry soap powder combined with a little water and allowed overnight to “pull” out the gasoline. Even so, it’s possible that it’ll take more than one attempt.
- I’m not sure if this would be safe in a basement, but here’s a link to something similar that would work for diesel:
- “In a clean empty gallon milk jug, combine hot water, ammonia, washing soda, and vinegar. After shaking the jug, clean the area where the fuel was spilled with it. This will disinfect the area and remove any odors.”
Does vinegar remove oil stains from concrete?
An oil spill on cement can soak into the surface, resulting in a discolored region that attracts dirt. Whether it’s motor oil or grease from a recent barbecue, it needs to be cleaned up and removed as soon as possible. While there are commercial products for cleaning off oil on cement, you can also use natural degreasers like vinegar.
Does diesel evaporate from concrete?
In our section of the Southwest, concrete contractors utilize diesel fuel to cure the concrete. Is this a viable method of concrete curing in the desert? In the summer, it appears to evaporate in a matter of hours, yet it appears to be effective throughout the Cooper months, or is this just an illusion? Other than water or a cover, what would you recommend as the best cure in this area?
A: It seems unlikely that diesel fuel, which evaporates in a few hours, would be adequate in the heat. When tested in accordance with ASTM C 156, “Water Retention by Concrete Curing Materials,” the concrete must lose no more than 0.055 grams of water per square centimeter of surface in a period of 72 hours, according to ASTM Standard Specification C 309, “Liquid Membrane Forming Compounds for Curing Concrete.” This test is carried out on a specimen covered with a standard amount of liquid membrane curing agent in a curing chamber at 100°F.
If diesel fuel evaporates in a matter of hours, it can’t possibly hold moisture for the time period specified by ASTM C 309. Although diesel fuel appears to function better at low temperatures than at high temperatures, there does not appear to be a clear technique to assess its performance in these conditions.
Concrete cures more slowly at low temperatures and hence requires more time to benefit from the curing medium, canceling out at least some of the benefit of slower diesel fuel evaporation at low temperatures.
If diesel fuel were a good and acceptable curing agent, it’s conceivable that someone would market it under a brand name.
If water or a cover, such as polyethylene or waterproof curing paper, are not available, the optimum curing option is usually a curing compound that meets ASTM C 309. If there is any doubt about its efficiency at extreme temperatures such as those seen in the desert during the summer, the curing component could be applied thicker.
Does diesel weaken concrete?
Q: Will concrete floors degrade if they are exposed to petroleum-based lubricating lubricants and transmission fluids?
A.: It’s been stated that pure mineral oils like gasoline, fuel oils, lubricating oils, and petroleum distillates don’t harm mature concrete (Refs. 1 and 2). However, according to a 1950 book (Ref. 3), adding fatty oils to lubricating oils improves their performance (animal and vegetable oils). These oils have the ability to breakdown into fatty acids, which dissolve concrete. We don’t know if modern lubricating oils contain fatty oils, but they certainly have additives that help refined-petroleum base stocks work better. We don’t have any data on the concrete impacts of such compounds.
Because of oxidation, it’s also known that used lubricating oils have increased levels of acidity. The references listed, however, do not discuss the consequences of used vs. virgin oils. It’s probable that used oils will destroy mature concrete due to their increased acidity. However, if that’s the case, expect to see a lot of deteriorated, oil-stained garage floors. Have any of our readers seen concrete deterioration in industrial floors that have been subjected to oil spills on a regular basis?
References
- The Chemistry of Cement and Concrete, 3rd ed., Chemical Publishing Co. Inc., New York, 1971, p. 660. F.M. Lea, The Chemistry of Cement and Concrete, 3rd ed., Chemical Publishing Co. Inc., New York, 1971, p. 660.
- Sandor Popovics, “Chemical Resistance of Portland Cement Mortar and Concrete,” Noyes Publications, Park Ridge, N.J., 1986, p. 336 in Corrosion and Chemical Resistant Masonry Materials Handbook.
- Influences on Concrete, A. Kleinlogel, Frederick Ungar Publishing Co., New York, 1950, pp. 91-93.
Readers Respond
A reader wrote in to ask if exposure to petroleum products causes concrete floors to decay in the March 1997 Problem Clinic (pp. 314-315). I have some experience that might be able to help with a partial solution. I was hired as a concrete construction engineer to look into serious concrete deterioration of reinforced-concrete foundations, piers, and beams beneath a paper machine at a factory in British Columbia. The concrete was poured in the late 1920s and may have contained saltwater aggregates. Lubricating lubricants from machinery flowed over particular portions of the concrete over the years, causing deterioration that had advanced several inches into the concrete. The concrete was of good quality and exhibited no symptoms of deterioration away from the oil exposure, with core strengths of around 3000 psi.
As a result, we know that lubricating oils were the primary cause of concrete damage in this situation. It is hypothesized that lubricating lubricants from the past (and possibly the present) had sufficient sulfur, which changed to acid in the alkaline concrete over time. The concrete floor had significantly degraded in sections where diesel oil had been pouring continually for almost 20 years at another business I inspected, where diesel injectors were being remanufactured. The oil’s chemical onslaught caused the degeneration.
Does Coca Cola remove oil stains from concrete?
In my previous piece, I discussed catching and eliminating motor oil spots as soon as they appear. Today, I’ll talk about how to get rid of stains that weren’t handled right away.
If you catch a stain (oil or else) as it happens, it will always be easier to remove it.
Older oil stains take a little longer to clean and are a little more complicated.
However, in some circumstances, they provide an opportunity to use a unique set of tools.
Coca-high cola’s acidity makes it a fantastic tool for cleaning or eliminating a variety of things, from jellyfish stings to rust and battery acid.
Coke is also a great way to get rid of old motor oil stains.
Pour a can of Coke over the affected area and leave it overnight to let the high acidity of the Coke eat away at the discoloration.
Take a pail of warm water and some dishwashing liquid or laundry detergent in the morning, blend it together a little to make a decent mixture, then gently pour it over the Coked and stained area.
Second, use kitty litter, baking soda, or any other absorbent powder to cover the oily patches (cornmeal, sawdust, etc.).
While the stained area is still wet, do this.
Cover the stained area with warm water once you’ve waited and the area is dry.
After applying an absorbent powder to the stained area, use a wired brush or similar brush to gently scrub the area in a circular motion.
Finally, dust the soiled area with a cup or so of dishwasher detergent (powder).
Allow for five minutes before adding 2-3 cups of water to the pot (you may need more depending on the size of the stain).
Pour the boiling water over the stained area with caution.
After that, scrub the area gently with a wired (or similar) brush before rinsing it with more boiling water.
You should have made some progress by now.
However, depending on the stain’s age, you may only be removing a shade of it.
Remember that because this is an old stain, it will normally require more work and measures to remove.
If the oil stain persists, purchase a commercial concrete cleaner (Red Devil Co.) or a grease solvent (Benzine) and follow the manufacturer’s instructions for use.
If this doesn’t work, you might want to consider hiring a professional cleaning company in your region.
Will diesel stain?
“Why does diesel smell so bad?” you might question if you own a diesel-powered RV. I’ll tell you right now that diesel in the United States contains more sulphur than diesel in other countries. Sulphur smells like rotten eggs if you’ve ever drove past a natural hot springs pool.
Diesel, on the other hand, does more than just make your clothing smell bad. When you launder garments with diesel stains, it stains them and leaves a stink in your washing machine.
How do you neutralize diesel fuel?
Add boiling water, ammonia, washing soda, and vinegar to an empty milk jug. Use the jug to clean up the spilt diesel by shaking it. The space will be cleansed and scents will be removed.
Does Coke remove oil stains from driveway?
An oil stain can leave a very dark brown or black colored stain that can range in size from a few small drips to a very huge stain on your driveway, sidewalk, or garage floor, making it one of the easiest stains to recognize. Many alternative methods for lightening and removing oil stains from your driveway, sidewalk, and garage floor exist, and many of them employ common home products that you probably already have on hand.
- Dish soap is the first approach for removing oil stains with an easily available household item. One of the most frequent soaps used to remove oil stains is Dawn dishwashing liquid soap. To combine with the oil and subsequently remove it away from the surface, soap performs the emulsification process. Scrub the oil stain thoroughly with a mixture of dish soap and water, then rinse it away with water.
- Powdered laundry detergent is another common household item that can be used to remove oil stains. When employing this procedure, most individuals apply powder laundry detergent to the entire oil stain and then lightly dampen the powder laundry detergent. The paste should then be agitated and scrubbed into the stain with a brush or a broom before being rinsed away.
- Wetting the dry stain with water and then scrubbing it with a stiff brush and a mixture paste formed from water and baking soda is another way for removing oil stains with a common household item. After completely scrubbing the oil stain with the paste, rinse the stain area with a hose set to normal pressure and air dry.
- Using Coca-Cola on an oil stain is one of the oldest ways for removing it. This procedure works best on stains that aren’t too big. Any form of cola product can be poured straight over the oil stain and left to soak in overnight (or for at least 8 hours). Simply rinse away the cola stain when it has soaked into the oil stain.
- If none of the other ways for removing an oil stain from your driveway, sidewalk, or garage floor are working, it’s definitely time to invest in a heavy-duty engine degreaser. Other methods should be tried first because engine degreasers are heavier and more hazardous to the environment. However, because this product was created to remove oil and grime from engines, it is also quite effective on roads, walkways, and garage floors. Scrub the oil stain with a wire brush after using the engine degreaser. Simply rinse away the oil stain once it has been completely cleansed. Rather to just washing away the oil and engine degreaser, cover the area with kitty litter, clean it up, and dispose of the trash. When you have older, dried-in oil stains that need to be cleaned and removed, this procedure works best.
